> For the complete documentation index, see [llms.txt](https://noren.gitbook.io/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://noren.gitbook.io/docs/products/atmrobberysystem/setup/jsm.md).

# Setup for JSM ATM V3

***

## Installing the system

{% stepper %}
{% step %}

### Locate the Integrations folder

The Integrations folder can be found directly in the main "JSM | ATM V3" folder.
{% endstep %}

{% step %}

### Parent the system to the Integrations folder

Parent the ATM Robbery System folder to the `Integrations` folder like shown below.

<figure><img src="https://2003973015-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwTl7ee71Ep2CrOl2uOej%2Fuploads%2FE7MnuafN4XeHJvj6OF5u%2Fimage.png?alt=media&amp;token=52781f91-d6ef-447a-84b5-e0c04d80da0c" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}

## Setting up the proximity prompt

The system will require a part to display the proximity prompt for robbing for each ATM.

{% stepper %}
{% step %}

### Locate the ATM's `Body` model

<figure><img src="https://2003973015-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwTl7ee71Ep2CrOl2uOej%2Fuploads%2FN4K2l0bNlfAsfSrnyOmT%2F%7BFB1DC4EE-5292-4293-B80E-8C0A023FC290%7D.png?alt=media&amp;token=ddf6a41d-5c8c-435a-8a20-2738042d3259" alt="The hierarchy of a JSM ATM SelfServ 28 model."><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### Decide which part you want to use

You must only decide a part from the `Body` model. The system will not search for labeled parts outside of the `Bod`y model.
{% endstep %}

{% step %}

### Label the part

{% hint style="warning" %}
The system will fail to initialize if it cannot find the part. Make sure that the name is correct and it is parented to the ATM's Body
{% endhint %}

Rename the part you want to use to "PromptPart" (case-sensitive).

<figure><img src="https://2003973015-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwTl7ee71Ep2CrOl2uOej%2Fuploads%2FJMHOxx7mQidJuwCZNHG4%2F%7B43B6AD95-23D0-419A-AEE5-7E500AFFAEE2%7D.png?alt=media&amp;token=09fc1245-4f71-4b6e-a9b9-4560e3997313" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}

***

## Setup is complete

Great! Now that you've completed all the previous steps, your setup is now complete. Don't forget to configure the system using the `SystemConfig` module in the ATM Robbery System folder.

You might want to know about **engaging** before you configure your ATM. See [Engaging an ATM](/docs/products/atmrobberysystem/engaging-an-atm.md).